KTM 69029096140 Guia De Inicio Rapido página 5

2
3
1
It is recommended that you only use the UST in cooperation with an authorized KTM workshop.
You should be aware that use of the UST enables you to alter the adjustment of your motorcycle in such a way that the motorcycle
may cease to function properly and/or engine damage may occur. Use of the UST requires a special mapping on your motorcycle
that can be obtained from your KTM dealer. When this mapping is transferred to your motorcycle, all warranty claims become null
and void. Because the UST is made up of electronic components, it must be handled with utmost care. Contact with dust, dirt and
water should be avoided.
7
6
Scope of delivery:
1x user setting tool (UST) - adapter (1)
1x USB cable (2)
1x UST adapter protective sleeve (3)
4
1x diagnosis plug-in cable
5
Preparations
1
3
-
-
-
Mounting the UST for riding
4
-
NOTE:
The plug-in connector (6) is used to activate and deactivate the ignition.
Plug-in connector disconnected --> ignition off.
Plug-in connector connected --> ignition on.
3 1
-
-
Route the diagnosis plug-in cable such that it is not damaged when the
seat is mounted.
NOTE:
While data is being recorded during the ride, the plug-in connector (6) for
1
the ignition must be disconnected --> ignition off.
Final steps
-
A
1x diagnosis plug-in cable (4)
1x cable for external battery connection (5)
Switch off the ignition.
Jack up the motorcycle.
Remove the seat.
Connect the diagnosis plug-in cable (4) with the motorcycle wiring harness
(7) and the UST adapter (1).
Pull the protective sleeve (3) over the UST adapter (1) and under the fixa-
tion rubber element of the battery (Figure A).
Route the diagnosis plug-in cable.
Mount the seat.
69029096000
69029096020
69029096030
69029096110
5