Troubleshooting; Disposal - Silvercrest XJ-13409 Manual De Instrucciones

• Clean the blade attachments (3, 8) with clean, warm water and a little mild washing-up
liquid.
• Wipe the motor unit (4) with a slightly damp cloth and then dry it thoroughly.
• Allow all parts to dry completely before assembling the device again and/or putting it
away for storage. Store the device in a dry, clean place that is not accessible to children.
The blade attachments (3, 8) are Þ tted with a sealing ring (2). This sealing ring (2)
ensures that the mixing container(1, 9) doesn't leak during processing. After each
cleaning operation, check whether the sealing ring (2) is still in the correct position.

Troubleshooting

If the device is not working properly, please check Þ rst of all whether you are able to rectify
a problem yourself. Otherwise you should contact the customer service department.
Do not attempt to repair a defective device yourself!
Problem
The device
does not work.

Disposal

The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be dis-
posed of in the normal domestic waste. Dispose of it at a recycling centre for used
electrical and electronic devices.
You can obtain more information from your local authorities.
Possible Cause / Solution
• Is the mains plug correctly inserted in the plug socket?
• Is the socket defective? Try another socket.
• Check the fuse of your mains connection.
• Is the mixing container (1, 9) placed correctly on the motor unit
(4)? The device can only be switched on if the mixing container
(1, 9) is correctly locked into place on the motor unit (4).
21