Descargar Imprimir esta página

oventrop TRV9 Manual De Instrucciones página 14

Ocultar thumbs Ver también para TRV9:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Thermostat "vindo TH"
approx. 28°C / 82°F
approx. 24°C / 75°F
approx. 20°C / 68°F
approx. 16°C / 61°F
approx. 12°C / 54°F
approx. 7°C / 45°F
approx. 0°C / 32°F
Installation:
1. To guarantee an easy installation of the
thermostat, turn handgrip to fully open
position (figure "5").
2. Align the thermostat so that the indicator
mark is clearly visible.
3. Hold in this position and tighten collar nut
without using excessive force.
Now set thermostat to the required room
temperature.
14
Limiting the control range
The thermostat is equipped with two limiting
clips for individual room temperature limitation.
They can be found on the outer side of the
handgrip between figures "5" and "0" in the
"parking position". They slide with the help of
a suitable tool or pen, e.g. a ball pen.
The thermostat can be limited to any graduation
line, figure or frost protection symbol.
Example: Limiting the control range to a minimum
of about 16°C (figure "2") and a maximum of
about 24°C (figure "4").
To limit the minimum control range, for instance
at figure "2", one limiting clip should be fitted
into the groove immediately before figure "2"
(the groove directly opposite figure "2" thus
remains free).
To limit the maximum control range, for instance
at figure "4", the second limiting clip should be
fitted into the groove immediately after figure
"4" (the groove directly opposite figure "4" thus
remains free).

Publicidad

loading