Memory Functions - Fermax LOFT COMPACT COLOR 4+N MEMORY Manual De Instrucciones

MEMORY FUNCTIONS

Image Saving Function
Keeping the Memory monitor in «standby mode» allows the automatic storage of the last 127 images
taken by the video camera on receiving calls. These images can be viewed subsequently, indicating
the date and time on which they were taken.
The monitor can function in either of the modes displayed below, and which are selected using the
memory function buttons (
STANDBY Mode
The monitor remains in this mode, awaiting a call from the entry panel. On receiving a call the monitor
will wait three seconds and then take a photo.
Monitor Adjustment Mode
To adjust the monitor controls: SHINE, CONTRAST AND COLOUR.
With the Monitor in STANDBY mode (standby, monitor screen off), hold down the REC button for 2
seconds and you will see the following screen:
MENU
DISPLAY
TIME
EXIT 23.01.2008
Pressing REC , we select the DISPLAY option (red text).
MENU
DISPLAY
TIME
EXIT 23.01.2008
Pag 22
REC ).
and
‡
+ 3
seg./sec./sek.
12:37
BRIGHTNESS
50
CONTRAST
50
COLOR
50
12:37
Press to move between the different options.
Sequential Order: DISPLAY, TIME, EXIT, DISPLAY,
TIME... (the colour of the text will change to
yellow to indicate the option we are currently
in).
Press REC to the select the option
(red text).