Publicidad
Idiomas disponibles
Idiomas disponibles
5. Disconnect fog lamp connectors (if equipped).
6. Remove grille assembly from front fascia.
a. Remove screw securing grille to fascia support. See
Figure 5. Repeat for opposite side of the vehicle.
FIGURE 5
SCREW
SECURING
GRILLE TO
FASCIA
SUPPORT
b. Release the tabs securing the grille to the fascia. See
the tab location for one side of the vehicle in Figure 6.
FIGURE 6
TAB LOCATIONS
Cadillac Escalade/ESV/EXT Grille Inserts
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION
AUTH
Installation of New Grille
1. Secure the grille by snapping the tabs into the fascia.
2. Reinstall the screws securing grille to fascia support. See
Figure 7.
FIGURE 7
SCREW
SECURING
GRILLE TO
FASCIA
SUPPORT
3. Install front fascia to vehicle. See Figure 8.
a. Connect the fog lamp connectors.
b. Install fascia retainers.
c. Tighten fascia screws to 9 Nm (80 lb in).
FIGURE 8
IR 27OC05
PART NO.
INSTALLATION INSTRUCTIONS
DR
TITLE
Cadillac Escalade/ESV/EXT Grille Inserts
PART NO.
19156895
6200 Grand Pointe Dr., Grand Blanc, MI 48439
1
2
19156895
SHEET
2
SHEET
2
9
OF
9
OF
Publicidad
