Zanussi ZWI 71000 WA Manual De Instrucciones página 15

Ocultar thumbs Ver también para ZWI 71000 WA:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning the drawer recess
Replace the drawer and run the rinse pro-
gramme without any clothes in the drum.
Cleaning the pump
The pump should be inspected regularly and
particularly if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise during
draining due to objects such as safety pins,
coins etc. blocking the pump;
• a problem with water draining is detected
(see chapter "What to do if..." for more de-
tails).
Warning! Before opening the pump door,
switch the appliance off and remove the
mains plug from the socket.
Proceed as follows:
• Unplug the appliance.
• If it is necessary, wait until the water has
cooled down.
www.zanussi.com
Having removed the
drawer, use a small
brush to clean the re-
cess, ensuring that all
washing powder resi-
due is removed from
the upper and lower
part of the recess.
Place a container
close to the pump (A)
to collect any spill-
age.
Pull out the emergen-
cy emptying hose (B),
place it in the con-
tainer and remove its
cap.
When no more water comes out, unscrew the
pump cover by turning it anti-clockwise and
remove the filter. Use pliers, if necessary. Al-
ways keep a rag nearby to dry up any water
spillage when removing the cover.
Clean the filter under a tap, to remove any
traces of fluff.
Remove foreign bod-
ies and fluff from the
filter seat and from
the pump impeller.
Check carefully
whether the pump im-
peller rotates (it ro-
tates jerkily). If it
doesn't rotate, please
contact your Service
Centre.
Put the cap back on
the emergency emp-
tying hose and place
the latter back in its
seat.
Replace the filter into
the pump by inserting
it correctly into the
special guides.
Screw the pump cov-
er firmly by turning it
clockwise.
15

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido