Krups NOVO PLUS FNC1 Manual De Instrucciones página 18

Using the various functions of
your espresso machine
1. E
SPRESSO FUNCTION
. W
ITH GROUND COFFEE
For best results, we recommend that you first
pre-heat the accessories (filter holder, filter
and cups) without putting in ground
coffee. To do this :
Fill the water tank (1) (2) (3) and start the
•
appliance (5).
Put the filter holder in place (7) (8), and
•
place the espresso cups underneath.
As soon as the appliance reaches the correct
temperature the orange indicator light will go
out.
Turn selector to the
•
When the cups are full of hot water, reset
•
the selector to the O setting.
Once the appliance is hot, the espresso cups
can then be pre-heated on the cup warming
plate.
. Preparing an espresso :
Fill the water tank (1) (2) (3) and start the
•
appliance (5).
Put the filter for one or two cups into the
•
filter holder (6) .
Put one or two measures of ground coffee
•
into the filter with the measuring spoon and
tamp down using the measuring spoon (12)
(13).
Remove any ground coffee which is lying
•
around the filter (14).
Replace the filter holder (15).
•
Place one or two espresso cups beneath the
•
filter holder.
As soon as the appliance reaches the correct
temperature the orange indicator light will go
out.
Then turn the selector to the
•
(16).
• When the cups are full, reset the selector to
the O setting.
18
setting (10).
setting
Remove the filter holder and the filter from
•
the machine, and take out the coffee
grounds (17).
The filter can be refilled to make more
espressos.
. W «ESE»
ITH THE SPECIAL
( FNC2/FNC3)
MODELS
The E.S.E. system was designed for making
Italian-style "espresso ristreto" (squeezed).
The amount of coffee is 35 ml and the water
should take 20 seconds to run through.
«ESE», which stands for «Easy Serving
Espresso» , is a selected measure of coffee,
ground and pressed between two filter papers
making it ready for use. This system thus
makes it easy for you to prepare your espresso
because you avoid the measurement and
tamping down operations and it also makes it
easier for you to clean the appliance.
We do not intend, or recommend, that
the ESE servings are used for making a
long coffee.
We recommend that you take care, when
handling and storing the ESE servings, that
they do not become deformed.
For best results, we recommend that you pre-
heat the accessories (filter holder, filter and
cups) without any coffee. To do this:
Fill the water tank (1) (2) (3) and start the
•
appliance (5).
Put the empty ESE filter in place (7) (8) (9)
•
and position the espresso cup underneath.
Once the appliance reaches the correct
temperature, the orange temperature control
light will go out.
Then turn the selector to the
•
(10).
• When the cup is full of hot water, reset the
selector to the O setting.
Once the machine has heated up, the
espresso cups can be pre-heated on the cup
warming plate (on top of the machine).
. Preparing an espresso:
• Place the ESE serving in the ESE filter holder
fitted with its own filter (21).
FILTER HOLDER
setting