Reset Via The Keypad - DURAVIT DuraSystem WD5006 Manual De Uso

Presence detection
Range
Table 2: Presence detection

Reset via the keypad

You can reset all settings to the factory settings and restart the software with the reset
function. You can perform a reset via the membrane keypad.
range
time
42
Factory settings
Activated
Approx. 50 cm
> Press the "range-" and "time-" setting
buttons simultaneously for 3 seconds.
The status LED flashes 3 times on the
membrane
to the factory settings.
Setting range
Activated/deactivated
Approx. 40 to 100 cm
(9 steps)
keypad. The settings are reset