Pur Line PANEL S Serie Manual De Usuario página 19

You only need to program the heater 1 time for daytime setback and 1 time for nighttime setback. If you have
programmed the heater, the setback programs will be active on the following days:
Daytime setback: Monday - Friday (day 1-5). Please note Saturday and Sunday don't run daytime setback.
Nighttime setback: All nights.
1) Daytime setback
When you want the heater to reduce the temperature during the day (set for weekdays from now on) press
. The display shows
Use the buttons
Friday=5, Saturday=6, Sunday=7). Save by pressing
Enter the desired temperature for daytime setback. Save by pressing
Enter the desired number of hours for daytime setback. Save by pressing
*The light indicator
the setback period is inactive, but has been programmed.
2) Nighttime setback
When you want the heater to reduce the temperature in the evening (applicable every evening/night from
now on) press . The display shows
Enter the desired temperature for nighttime setback. Save by pressing
Enter the desired number of hours for nighttime setback. Save by pressing
*The light indicator
the setback period is inactive, but has been programmed.
N.B! If a power cut occurs or you turn off the heater, the programming will be lost and you have to
do this over again.
3) Change setback temperature - Daytime
Press and hold and press
Enter the desired temperature for daytime setback. Save by pressing
confirmation.
4) Modificación de la temperatura de reducción - Noche
Press and hold and press
Enter the desired temperature for nighttime setback. Save by pressing
confirmation.
5) Cambiar el número de horas - Día
Press and hold and press
Enter the desired number of hours for daytime setback. Save by pressing
confirmation.
6) Modificar el número de horas - Noche
Press and hold and press
Enter the desired number of hours for nighttime setback. Save by pressing
automatic confirmation.
.
to enter the correct weekday. (Monday=1, Tuesday=2, Wednesday=3, Thursday=4,
is green when the heater is in an active setback period. The control light is red when
.
is green when the heater is in an active setback period. The control light is red when
3 times.
3 times.
2 times.
2 times.
EN
.
.
.
17
.
.
or wait 15 seconds for automatic
or wait 15 seconds for automatic
or wait 15 seconds for automatic
or wait 15 seconds for