Pur Line PANEL S Serie Manual De Usuario página 20

7) Cancel (skip) setback period
Press and hold and press
*The heater will skip an active setback period or the next setback period.
*During the next setback period, the heater will automatically resume the programmed temperature reduction.
8) Delete a setback program
Press and hold or
9) Open window function
The heater has an open window function.
If you open a window wide in the space where the heater is located and the temperature drops 2°C or more
within two minutes, a sensor will detect the temperature drop. The heater will automatically switch off and
will be shown on the display.
The heater will automatically switch on again after 10 minutes. However, you can switch the radiator back on
manually before the 10 minutes are up by pressing
operating mode.
The default setting of the open window function is closed.
Press and hold the button
the window open function, the display will show "ON" icon and flash for 15 seconds to confirm automatically,
or you can press to confirm directly.
If the window open function is open and you want to close it, press and hold the button
display will show , then press the button
"OFF" icon and flash for 15 seconds to confirm automatically, or you can press
10) Resetting the heater
Turn off the main switch of the heater.
Press and hold while turning on the heater main switch.
11) Memory function
*The heater remembers the free mode temperature settings and will automatically return to the desired
temperature after a power failure. But it cannot remember the day and night setback settings.
or once (depending on which setback period you want to cancel).
(depending on which setback period you want to cancel) for 3 seconds.
for 5 seconds, the display will show
. The icon disappears and shows the previous
, then press the button
to close the window open function, the display will show
18
to open
for 5 seconds, the
to confirm directly.