Kit Assembly - Metra 99-7357H6 Manual Del Usuario

ISO DIN radio provision with pocket
1. Attach the radio brackets to the
radio housing trim panel.
(Figure A)
2. Mount the pocket to the bracket/
panel assembly with the
(4) #8 x 3/8" Phillips screws
supplied. (Figure B)
3. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure C)
4. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections
to the radio. Metra recommends
using the proper mating adapter from
Metra and/or AXXESS. Test the radio
for proper operation.
5. Mount the new radio assembly into
the dash and reassemble the dash
in reverse order of disassembly.
99-7357HG

Kit Assembly

(Figure A) (Figure B)
3
(Figure C)