Kit Assembly - Metra 95-7817HG Instrucciones De Instalación

1. Attach the radio brackets to the
radio trim panel using the (4) #8 x 3/8"
Phillips screws provided. (Figure A)
2. Slide the radio into the bracket/panel
assembly from the back, and secure
it using the screws supplied with the
radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or Axxess. Test the radio for
proper operation.
4. Secure the completed assembly into the
dash using the factory screws.
5. Reassemble the dash in the reverse
order of disassembly.

KIT ASSEMBLY

(Figure A) (Figure B)
REV. 4/19/2022 INST95-7817HG
3