Kit Assembly - Metra 99-7341B Instrucciones Para La Instalación

Ocultar thumbs Ver también para 99-7341B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ISO DIN radio provision with pocket
1. Remove the metal "DIN" sleeve
and plastic trim ring from the
aftermarket radio.
2. Secure the pocket to the Radio
Brackets using the supplied (4)
screws. (Figure. A)
3. Secure the radio to the Radio
Brackets with screws supplied
with the radio. (Figure. B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-
connect the negative battery
terminal and test the unit for
proper operation.
5. Mount the completed assembly
into the dash, and then clip the
radio trim plate onto the assembly.
6. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-7341B
Double DIN radio provision
1. Mount the radio to the Radio
Brackets with screws supplied with
the radio. (Figure. A)
2. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-
connect the negative battery
terminal and test the unit for
proper operation.
3. Mount the completed assembly
into the dash, and then clip the
radio trim plate onto the assembly.
4. Reassemble the dash in reverse
order of disassembly.
3
(Figure A)

Publicidad

Tabla de contenido
loading

Tabla de contenido