essentiel b ERCVE200-60b1 Manual De Utilización página 29

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

You will need an 8mm and a 12mm wrench and a cross-headed screwdriver.
2 people are needed to complete this operation. You can contact a qualified professional
if needed.
Unplug the appliance from the electrical outlet when
reversing the opening direction of the doors.
1.
Unscrew the top hinge cover at the top right of the appliance
and remove it. Insert the assembly rod into the hole provided
for this purpose on the top of the appliance.
2.
Unscrew the 4 screws of the upper hinge and remove it.
Dislodge the door ring and the small cap at the end of the
door.
3.
Insert the door assembly ring and rod into the door hole
provided, then insert the small cap.
29
V.1.0
installation

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ercve200-60v1

Tabla de contenido