13.
Remove the pin and the two stops on the lower hinge and
install them in the following position:
A. This situation applies to a door that opens on the right
side.
B. This situation applies to the left side. Mount the
refrigerator door and the freezer door on the opposite
side.
14.
Remove the adjustable front foot
and mount the lower hinge on the
other side of the appliance. Tighten
the screws. Reassemble the foot
on the lower hinge and adjust
the height of the foot so that the
refrigerator is level.
15.
Position the freezer door, then turn the intermediate hinge
180°. Then mount it on the other side of the appliance.
Tighten the 3 screws to secure the intermediate hinge.
16.
Position the refrigerator door and mount the top hinge on
the other side of the appliance. Tighten the 4 screws to
secure the top hinge.
17.
Connect the door assembly rod and the appliance assembly
rod. Replace the top hinge cover and secure it with the
screw.
32
V.1.0
installation