essentiel b ERCVE200-60b1 Manual De Utilización página 30

4. At the top left of the appliance, unscrew the 2 screws of the
hole cover, then take the assembly rod out of its hole. Remove
the small cap at the end of the door, then remove the ring and
assembly rod from the door.
5. Insert the ring into the circular hole on the door and then insert
the small cap.
6. Gently lift the refrigerator door about 5 cm and remove it.
7. Unscrew the 3 screws of the intermediate hinge and remove
it.
8. Lift the freezer door about 5 cm and remove it.
30
V.1.0
installation