HP Latex 115 Información De Introducción página 10

Error code
14.72:01
14.73:01
14.74:01
14.75:01
14.87:10
8 HP Latex 115 and 300 Printer Series
Recommendation
Zero voltage detected.
1. Turn off the printer and unplug both power cords.
2. Check that the power cords are not visibly damaged.
3. Ensure that the input voltage is within specifications (180–264 V AC).
4. Plug in both power cords and make sure they are fully inserted.
5. Turn on the printer.
Very low voltage detected.
1. Turn off the printer and unplug both power cords.
2. Check that the power cords are not visibly damaged.
3. Ensure that the input voltage is within specifications (180–264 V AC).
4. Plug in both power cords and make sure they are fully inserted.
5. Turn on the printer.
Low voltage detected.
1. Turn off the printer and unplug both power cords.
2. Check that the power cords are not visibly damaged.
3. Ensure that the input voltage is within specifications (180–264 V AC).
4. Plug in both power cords and make sure they are fully inserted.
5. Turn on the printer.
Excessive voltage detected.
1. Turn off the printer and unplug both power cords.
2. Check that the power cords are not visibly damaged.
3. Ensure that the input voltage is within specifications (180–264 V AC).
4. Plug in both power cords and make sure they are fully inserted.
5. Turn on the printer.
Curing power regulator overtemperature detected.
1. Turn off the printer.
2. Check that the ambient temperature is within printer specifications (15–35°C).
3. Check that the electronic enclosures at the rear of the printer are properly
ventilated.
4. Turn on the printer.
ENWW