EGAmaster 79760 Manual De Instrucciones página 51

8. Hold the feeding pipe tight in one hand, while adjusting with the other hand the cutting
depth with the adjustment device. (see fig. 8.1).
9. Guide the machine around the pipe contrary to the rotating direction of the cutting tool by
using the feeding pipe (see fig. 9.1).
10. For bevelling:
- Disconnect machine from hydraulic line.
- Remove the adapter for the blade. (see fig.10.1).
- Mount the bevelling tool completely with the adapter (see fig.10.2 – fig. 10.4).
- Change to gear 2 (see fig.10.5).
- Proceed as specified from point 6 onwards.
51