EGAmaster 79760 Manual De Instrucciones página 60

- The purity degree of the hydraulic oil
- The lubrication conditions and maintenance
- The regular control of the hydraulic filter/ the hydraulic fluid, as well as the regular
checking of the machine with regards to external damages.
Disassembly and re-assembly of the machine have to be executed only by qualified staff.
Incorrect assembly can cause a risk of accident for the operator and damage at the machine.
The most important maintenance measure is always keeping the hydraulic fluid clean. Polluted
fluid causes quick wear and/or a break-down of the internal parts.
Additionally to the measures described before, it is a must to check the grease in the gear
and to fill it up or replace it, if necessary.
The correct quantity of grease (25 g) is very important with regard to good lubrication and low
warming.
After completing maintenance and repair work and before restarting production make sure
that...
- all materials, tools and other equipment which are required for maintenance or repairs
have been removed from the work area of the machine,
- any fluid leaks have been removed,
- all safety devices of the machine are functioning correctly,
- the oil level was checked,
- screw connections are tightened,
- removed container covers, screens or filters were reinstalled,
The employer ensures that all maintenance, inspection and assembly work is done by
authorized and qualified experts, who have been appropriately advised by studying the
operation manual.
Maintenance and repair
Disassembly and re-assembly should be done according to the exploded views, respectively
the sectional drawings (see repair instruction).
All work regarding disassembly and re-assembly, as well as maintenance and repair have to
be executed by skilled staff only.
DANGER – Working with the machine without appropriate preparation and
disregarding of instructions. Shut down the machine properly and let it cool down to
the ambient temperature.
60
DISASSEMBLY- RE-ASSEMBLY