Environmental Regulations - EGAmaster 79760 Manual De Instrucciones

NOTICE – Special instructions apply for the repair of explosion-proof machines.
Retrofits or modifications of the machine need the manufacturer's acceptance.
The explosion-proof machine is designed in the type of protection "c" constructive safety.
All work executed on the machine, influencing the explosion protection, e. g. repairs with
mechanical machining, require an approval of an authorized expert or have to be done by the
manufacturer.
The internal structure must remain unmodified.
Unused machines and machine tools should be kept in a dry, closed room.
Keep them free from damaging influences such as damp, frost or large temperature
fluctuations as well as mechanical damage. Always store the machine in a way that important
machine instructions, e. g. on stickers and signs, are legible.
Dispose of machine and worn out/defective machine tools according the local/national
regulations. Fully disassemble the machine for the necessary disposal. Separate materials
according to local environmental specifications. Dispose of environmentally hazardous greasing,
cooling or cleaning agents in order to avoid environmental contamination.
When working on or with the equipment, it is imperative to observe all legal requirements
in regards to waste-disposal and proper recycling. In particular during installation, repair and
maintenance work, water damaging agents, such as:
· lubricating grease and oil,
· hydraulic fluid,
· coolant,
· solvent containing cleaning agents must not leak into the ground or reach the
sewage system.
These materials must be stored, transported, contained and disposed of in suitable
containers!
STORAGE
DISPOSAL

ENVIRONMENTAL REGULATIONS

61