EGAmaster 79760 Manual De Instrucciones página 63

Dependiendo del diámetro de la tubería, se requieren los siguientes componentes:
Pipe-Ø (mm)
300 - 400
400 - 800
600 - 900
400 - 1400
400 - 1600
Cutting tools: The cutting tool has to be appropriate for the pipe diameter. It should be
carefully selected by the operator.
On request, the components can be compiled individually for specific pipe diameters.
Recommendation
Select from the following table the cutting tool appropriate to the application of the drive unit.
When using the drive unit in explosive areas, cool, respectively rinse, the cutting area
continuously with water.
Material of the work piece
Cast iron, ductile iron, cement, concrete, clay and GFK
Steel, PE, PVC, non-ferrous metal and stainless steel
Material of the work piece
Steel, PE, PVC, non-ferrous
metal and stainless steel
of more than 4 mm
ACCESSORIES
Guide
carriage
1x5
1x5
2x5
1x5
2x5
of more than 4 mm
of more than 4 mm
Bevelling
More accessories
Carrier box
Chain
tensioner
1x5
1x5
2x5
2x5
2x5
Cutting
Bevelling tool
Tensioning
chain
1x5
1x5
1x5
1x5
2x5
Blades
Bevelling cutter
45° d=100
60° d=100
90° d=100
Tool set
63