Adjusting The Carburettor; Maintenance Intervals - Grizzly Tools BRM 46-125 BSA Traducción Del Manual De Instrucciones Original

• Take off the spark plug connector
( 12) and check the blade for wear
and damage.
• Always have a blunt blade resharpened
by a specialist company, as an imbal-
ance check can be carried out there.
• Always have a specialist workshop
change a damaged or imbalanced
blade.
Incorrect installation can result
in serious injury.

Maintenance Intervals

Regularly carry out the maintenance work listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting
performance and avoids accidents.
Maintenance Work
(See "cleaning and mainte-
nance")
Check and tighten screws, nuts
and bolts
Check the engine oil level/petrol
level and refill with engine oil/
petrol if required
Clean operating elements / the
area around the silencer
Clean the finger protection
Change the engine oil
Replace the air filter
Clean/adjust the spark plug
Replace the spark plug
Check the silencer and spark
catcher
b
Clean the air cooling system
Replace more often if there is a high level of dust or heavy dirt
a
See Briggs & Stratton instruction manual
b
Before


b
a
a,b

Adjusting the Carburettor

The carburettor has been preset in the
factory for optimum performance. If read-
justments are required, have the adjust-
ments made by a specialist workshop.
After
After 1
5 Hrs.
Work


After After
st
8 Hrs. 50 Hrs.






GB
Annual





95