Level Gauge; Mulch Kit; Lateral Grass Ejection; Filling With Engine Oil And Checking The Oil Level - Grizzly Tools BRM 46-125 BSA Traducción Del Manual De Instrucciones Original

GB
4. Pull plastic loops (29) over bas-
ket rods.
Fixing the Grass Collection
Box onto the Equipment:
5. Lift up shock protection (23).
6. Hook the grass collection box
(22) into the mounting provided
for this (31) on the rear of the
equipment.
7. Release the impact protection
(22). It holds the grass collec-
tion box in position.
Dismantling/Empty out the
Grass Collection Box:
8. Lift the impact protection (23)
and remove the grass collection
box (22)
9. Empty catchment basket (see
chapter „Disposal / Environmen-
tal Protection") and re-install it.

Level gauge

The level gauge (
the side of the grass catcher (
aerodynamic air guidance provided by the
flap also optimises the filling.
GO
Flap open: grass catcher empty
STOP Flap closed: grass catcher full

Mulch kit

Prior to using the mulch kit, the
lateral ejection canal has to be
removed. (see
Attaching mulch kit
1. Remove the collection box
( 22), if used.
2. Lift the impact protection (23).
3. Insert the mulch kit (27). The
90
22) is located on
25). The
)
bracket (27a) snaps into place.
Remove mulch kit
4. Lift the impact protection (23).
5. Push in the bracket (27a) and
remove the mulch kit (27).

Lateral grass ejection

Before using the lateral grass
ejection, the mulch kit (
has to be inserted and the grass
collection box (
removed.
Install lateral ejection canal
1. Unlock the lateral impact protec-
tion (17) by pulling the locking
element (17a) to the left and
opening the lateral impact pro-
tection (17).
2. Mount the lateral ejection chan-
nel (28) and remove the lateral
impact protection (17). It holds
the side ejection channel (28) in
position.
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level
base.
1. Unscrew the oil filler cap and
dipstick (21) and pour oil into
the tank. The oil tank holds 0.5 l
oil. Use brand oil (e.g. SAE 30).
2. To check the oil level, wipe the
dipstick (21) on a clean cloth
and replace it in the tank until it
stops.
27)
22) has to be