Error Messages - Sportplus SP-ET-9600-iE Manual De Instrucciones

7. USING THE COMPUTER

ERROR MESSAGES

Display
E1 (ERROR 1)
E2 (ERROR 2)
E3 (ERROR 3)
SP_ET_9600_iE_IM_INT_V05.indb 60
Cause
The computer does not receive any position signal from the
actuator (63), or the movement of the motor has been blocked.
• Check the wiring of the product for any damage or jamming.
• Check the movement range of the brake for any blockage.
• Please contact our customer service.
The system cannot recall the program data from the memory.
• The computer must be replaced.
• Please contact our customer service.
The actuator does not move to the designated position.
• Replace the actuator.
• Please contact our customer service.
60
4/29/2021 7:08:56 PM