Sagola Mini XTREME Manual De Instrucciones página 35

34/35
Faulty spray width
Incorrect spraying
The fluid needle does not close
Loose spray nozzle
Worn spray width regulator
Dirty or damaged
Tip-Nozzle joint
Blockages or dents in the air Turn the nozzle. If it
nozzle or fluid tip
Dirty air nozzle
Inadequate air pressure
Inadequate amount of product Adjust the amount
Inadequate viscosity
Spray width opening
Foreign bodies in fluid tip
Dirty packing gland in head
needle
Inadequate Tip+ needle
combination
Product regulator
excessively open
Needle spring worn
or not fitted to gun
Product with foreign bodies
ENGLISH
Tighten nozzle
Replace
Clean or replace
turns check the nozzle.
If not, check the fluid
tip
Clean the nozzle
Adjust the pressure
Adjust the viscosity
Adjust
Eliminate particles and
clean
Clean and/or lubricate
Replace
Adjust adequately
Replace or fit
Filter