General Safety Precautions; Product Description - Roger Technology B70/2DC Instrucciones Y Advertencias Para El Instalador

1

General safety precautions

Warning: incorrect installation may cause severe damage or injury.
intended usage indicated in this manual.
practices and in compliance with applicable regulations.
Before installing the product, make sure it is in perfect condition.
power line.
electrical installation in accordance with best practices and in compliance with applicable legislation.
When requested, connect the automation to an effective earthing system that complies with current safety standards.
Disconnect the mains electrical power before performing any work. Also disconnect any buffer batteries used.
Only use original spare parts when repairing or replacing products.
The packaging materials (plastic, polystyrene, etc.) should not be discarded in the environment or left within reach of
children, as they are a potential source of danger.
2

Product description

The B70/2DC
automation systems.
Ensure that the parameter A1 is set correctly. If this parameter is not set correctly, the automation system may not
function properly.
Use the same type of motor for both gate leaves in automation installations for double leaf swing gates.
ensuring that the gate leaves overlap correctly.
recommend installing R90/F4ES, G90/F4ES or T90/F4S series photocells.
38