Preparing Espresso; Preparing Cappuccino - Oster BVSTEM6601R Manual De Instrucciones

TURNING THE UNIT ON
a. Make sure unit is plugged in.
b. Turn unit on "I".
The 3 control panel lights will start blinking during heating and until the water reaches the
perfect temperature. Once these lights become solid, the unit is ready to use.
SELECT THE FUNCTION

PREPARING ESPRESSO

a. Press the Espresso Button "
b. Press the Espresso Button "
c. Press and hold the Espresso Button "
to your preference. When done, press the Espresso Button "
a.
x1
The unit will start brewing the espresso according to your selection. The unit will turn
off automatically and the lights will become solid indicating that the cycle has been
completed. Your delicious espresso is ready to be enjoyed.
NOTE: To brew less coffee than the preset serving, press the function button to stop
the brewing process when the amount of coffee desired is reached.

PREPARING CAPPUCCINO

Prior to preparing your cappuccino, adjust the quantity of frothed milk according to your
preference by turning the Froth Control Knob to the right for more foam and to the left for
less foam.
NOTE: The foam intensity can be adjusted during the brewing cycle.
a.
" once to brew one single shot.
" twice to brew a double shot.
b.
MORE FOAM
+
b.
" for 3 seconds to customize the brewing
Al Gusto
A Seu Gosto
Espuma
x2
Limp.
Auto Manual
3
+
Limp.
LESS FOAM
En glish-9
" once again to stop it.
c.
Al Gusto
A Seu Gosto
Espuma
Limp.
Auto Manual
hold for 3
+
3 sec.
Limp.