Enjoying music according to
your mood — SensMe™
Sony's unique "SensMe™ channels" and
"SensMe™ mood" features automatically group
tracks by channel or mood, and allow you to
enjoy music intuitively.
Before using the SensMe™
function
The following is the basic procedure required to
enjoy the SensMe™ function on the unit.
1 Installing "SensMe™ Setup" and
"Content Transfer" to your computer
First download the "SensMe™ Setup" and
"Content Transfer" software from the support
site on the back cover.
2 Registering a USB device using
"SensMe™ Setup"
Connect a USB device to your computer, and
perform registration using "SensMe™ Setup"
to enable the SensMe™ function on this unit.
SensMe ™
Setup
Tip
Registration can be performed either along with the
installation procedure or after installation.
3 Transferring tracks to the USB device
using "Content Transfer"
In order to group tracks by channel or mood,
track sound patterns need to be analyzed by
12 TONE ANALYSIS, which is loaded with
"Content Transfer."
With the USB device connected to your
computer, drag and drop tracks from Windows
Explorer or iTunes, etc., to "Content
Transfer."
Both analysis and transfer of tracks will be
performed by "Content Transfer."
24
Content
Transfer
4 Connecting the USB device and
enjoying the SensMe™ function on the
unit
Connect the set up USB device. You can then
enjoy "SensMe™ channels" or "SensMe™
mood" on this unit.
Installing "SensMe™ Setup" and
"Content Transfer" on your
computer
The software ("SensMe™ Setup" and "Content
Transfer") is required to enable the SensMe™
function on this unit.
1
Download the "SensMe™ Setup" and
"Content Transfer" software from the
support site.
2
Install the software in your computer.
For more details on the installation, visit the
support site on the back cover.
Registering a USB device using
"SensMe™ Setup"
USB device registration is required to enable the
SensMe™ function on the unit.
If registration is not performed along with the
installation procedure, follow the steps below.
1
Start "SensMe™ Setup" on your
computer.
2
Connect a USB device to your
computer.
3
Complete registration following the
on-screen instructions.
Tip
If you connect a registered USB device containing
analyzed tracks, the USB device can be unregistered
again.
SensMe™