Kit Assembly - Metra 95-7617GHG Instrucciones De Instalación

ISO DDIN radio provision
1. If equipped with automatic climate
controls, secure the climate module
removed in Dash Disassembly,
to the radio brackets, using the
factory hardware. (Figure A)
2. Slide the radio into the completed
assembly, and then secure it using
the screws supplied with the radio.
(Figure A)
3. Locate the factory wiring harness
and antenna connector in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4 Reassemble the dash in reverse
order of disassembly.
95-7617GHG

Kit Assembly

(Figure A)
®
3