Kit Assembly - Metra 95-7354B Instrucciones De Instalación

1. Secure the radio brackets to the radio
housing with the (4) #8 x 3/8" Phillips
screws provided. (Figure A)
2. Slide the radio into the bracket/housing
assembly, then secure it using the
screws supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or Axxess.
Test the radio for proper operation .
4. Reassemble the dash in reverse order of
disassembly.

KIT ASSEMBLY

(Figure A)
(Figure B)
REV. 5/1/2018 INST95-7354B
3