General Power Tool Safety Warnings; Work Area Safety - Parkside PSBM 750 B2 Traducción Del Manual De Instrucciones Original

Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Drilling in metal:
(Main handle): a = 6.190 m/s
h,D
(Additional handle): a
h,D
K = 1.5 m/s 2
Hammer drilling in concrete:
= 10.858 m/s
(Main handle): a
h,ID
(Additional handle): a
h,ID
K = 1.5 m/s 2
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
► The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions
in some cases.
Regular use of the power tool in this way may
cause the user to underestimate the vibration.
Try to keep the vibration loads as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the
power tool is switched on but running without
load).
PSBM 750 B2
2 , K = 1.5 m/s
= 5.874 m/s 2 ,
2 , K = 1.5 m/s
= 10.276 m/s 2 ,
General Power Tool
Safety Warnings
2
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
2
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-
operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
GB │ MT │
33 ■