Assembling The Grass Bag - Yard force YF22-3N1SP Manual Del Operador

IMPORTANT: Unfold handle carefully to avoid pinching or damaging the control cables.
1. Fasten the lower handle to the lawn mower deck by using 1 knob and 1 bolt on each side.
2. Fasten the lower handle to the device by using two arc head bolts and two fixing knobs on each side.
3. Unfold the upper handle and attach it to lower handle by using 1 knob and 1 bolt on each side.
CLIP CONTROL CABLES TO THE HANDLE
As shown in Fig. 5
Attach the control cables to the handle with the clip (supplied).

ASSEMBLING THE GRASS BAG

As shown in Fig. 6
1. The grass bag already be half assembled. Make sure the frame handle is outside of the bag top.
2. Slip the vinyl bindings over the frame.
ASSEMBLY
Fig. 4
Fig. 5
Clip
Fig. 6
10
Bolt
Knob
Hotline: 1-866-902-9690