Operation; To Start The Engine - Yard force YF22-3N1SP Manual Del Operador

START AND STOP THE ENGINE
WARNING: the blade begins to rotate as soon as the engine is started.
NOTE: Do not operate the lawn mower in enclosed or poorly-ventilated areas as the exhaust
gas contains toxic substances.
Keep hands, feet, hair and clothing away from the moving parts of the machine. The exhaust and
other parts of the machine will become hot during use.
Make sure that the blade is securely fastened before starting the engine.
NOTE: to start the engine, make sure that the spark plug cover is connected to the plug and the
machine is filled with sufficient oil and gas.

TO START THE ENGINE

NOTE: Due to protective coatings on the engine, a small amount of smoke may be present during the initial
use of the lawn mower. This is normal.
NOTE: NOTE: Your engine is equipped with an automatic choke system. No priming or choking is required
before starting.
1. The engine equipped with an automatic choke system. No priming or choking is required before starting
for your mower.
2. Stand behind the mower. Pull the Engine On/Off Control Bar toward upper handle with one hand and
place the other hand on the Engine Start Handle.
3. Pull the starter handle out approximately 4" to 6" until you feel a resistance and then start the engine
with a sharp pull (see Fig.14). DO NOT allow the starter rope to snap back.
NOTE: If the engine fails to start after three pulls, repeat the process.
Hotline: 1-866-902-9690

OPERATION

Fig. 14
15