Safety Instructions - Ferm FRS-600D Manual De Instrucciones

REF.NR. DESCRIPTION
1 ADJUSTABLE SAW BASE
3 CLAMP HANDLE FOR SAW BASE
4 CLAMP ROD
19 T/M 21 SAWBLADE HOLDER COMPLETE
45 BRUSH HOLDER
46 BRUSH ( SET )
47 BRUSH CAP
51 SWITCH
58
All manuals and user guides at all-guides.com
SPARE PARTS
FERM NR.
408520
RECIPROCATING SAW
408521
408522 TECHNICAL SPECIFICATIONS
408523
Mains voltage
Frequency
408524
Power input
408525
No load speed
Saw stroke
408526
Weight
408527
Lpa (sound pressure)
Lwa (acoustic capacity)
Vibration
Max. saw capacity (wood)
PRODUCT INFORMATION
1 On/off switch
2 Handgrip
3 Locking button
4 Footplate unlocking lever
5 Quick coupling system
6 Footplate
7 Saw blade for wood
8 Saw blade for metal

SAFETY INSTRUCTIONS

These instructions use the following images:
There is danger of material damage or bodily
injury.
There is a chance of electric shock.
The tool meets the safety requirements stated in
the applicable European guidelines.
Class II equipment – Doubly insulated – An
earthed plug is not necessary
The revolutions of the machine can be
electronically regulated.
Read the instructions.
Wear safety glasses.
Wear ear protection.
Ferm Ferm
ATTENTION!
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury. Read the
following safety instructions and also the enclosed safety
instructions.
Keep these instructions in a safe place!
1. Keep work area clear.
| 230 V~
Cluttered areas and benches invite injuries.
| 50 Hz
2. Consider work area environment.
| 600 W
Do not expose power tools to rain. Do not use
| 0-2500/min
power tools in damp or wet locations. Keep work
| 18 mm
area well lit. Do not use power tools in presence of
| 2.75 kg
flammable liquids or gases.
| 87.5 dB(A)
3. Guard against electric shock.
| 100.5 dB(A)
Prevent body contact with grounded surfaces (e.g.
| 18.503 m/s2
pipes, radiators, refrigerators).
| 115 mm
4. Keep visitors away.
Visitors should be kept away from the work area at
all times. Do not let visitors handle the Electric
Rotary Hammer Drill at any time.
5. Store unused tools.
When not is use keep tools out of reach of children.
Store in a dry and secure location.
6. Do not force tool.
Do not apply undue pressure as this may affect
performance and may cause damage to the machine.
Forcing the job also increases the potential for
accidents.
7. Use right tool.
Do not force small tools or attachments to do the
job of heavy duty tool. Do not use a tool for purposes
not intended.
8. Dress properly.
Do not wear loose clothing or Jewellery. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working
outdoors. Wear protective hair covering to contain
long hair.
9. Use safety glasses.
Also use face or dust mask when operation is dusty.
10.Connect dust extraction equipment.
If devices are provided for the connection of dust
extraction and collection facilities ensure these are
connected and properly used.
11.Do not abuse cord.
Never carry tool by cord or yank it to disconnect it
from electrical socket. Keep cord from heat, oil and
sharp edges.
12.Secure work.
Use clamps or a vice to hold work. It's safer than
using your hand and it frees both hands to operate
tool.
13.Do not overreach.
Keep proper footing and balance at all times.
14.Maintain tools with care.
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and, if damaged, have repaired by authorized service
facility. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean and free
from oil and grease.
3