Restore The Machine Config - Baxtran ABS Serie Manual Del Usuario

10. RESTORE THE MACHINE CONFIG

PURPOSE
Operator can restore the machine to factory setting by input the code in menu.
KEY (ORDER)
Press and Hold
[MENU] Key
Short Press [MENU]
Key Four Times
Short Press [CAL]
Key
Short Press [CAL]
Key
Short Press [TARE]
Key
!
For the convenience of operator remember the code, the restore factory setting code all is: 8888. Operator can not set other code.
NOTE: The grey color words explain the signal's meaning which flash on the window..
STEP EXPLANATION
1. Display Menu
2. Enter Into restore factory setting function
3. Enter Into the input code
• Press [UNIT] key to move the cursor and press [PRINT]
key to select the number. THE CODE IS: 8888
4. Confirm and return to previous menu
5. Finish Setting and return to standby
USER'S MANUAL ABS
LCD SCREEN MENU LEVEL
DISPLAY AND CODE
--nodE-
1 .
-ConFIG
5 .
Cod0000
5.1
-ConFIG
5.
EN EN
101