Publicidad
Roll completed assembly to desired position. Fill base with approximately 37 gallons (140 Liters) of water or approximately 400 lbs.
8.
(181 kg) sand and rotate the caps (41, 56) into base (1).
Faites rouler l'ensemble jusqu'à la position désirée. Remplissez le socle de 37 gallons d'eau (140 litres environ) ou de 400 livres de
sable (181 kg environ) et tournez les bouchons (41, 56) sur le socle (1).
Den fertigen Aufbau an die gewünschte Position rollen. Den Sockel mit Wasser (ca. 37 Gallonen / 140 Liter) oder Sand (ca. 400 lbs /
181 kg) füllen und die Kappen (41, 56) in den Sockel (1) schrauben.
Mueva el conjunto completo a la posición deseada. Llene el tanque con agua (aproximadamente 37 galones / 140 litros) o con arena
(aproximadamente 400 libras / 181 kg) y ponga la tapa a presión (41, 56) en la base (1).
CAUTION!
ADD TWO GALLONS (7.6 LITERS)
OF NON-TOXIC ANTIFREEZE IN
SUB-FREEZING CLIMATES.
IF USING SAND: 2 GALLONS OF
ANTI-FREEZE IS NOT REQUIRED.
NOTE:
1
DO NOT LEAVE ASSEMBLY UNATTENDED
WHEN EMPTY; IT MAY TIP OVER.
WARNING!
Cap (41) MUST be tightened COMPLETELY
and SECURELY to prevent leakage.
CHECK WATER LEVEL BEFORE EACH USE!
FAILURE TO FOLLOW THIS WARNING COULD RESULT
IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
203617
41
41
WARNING!
Publicidad
