Harbor Breeze LARALYN LRN32 Manual Del Usuario página 7

FINAL INSTALLATION
3. Install the non-slotted screws previously
removed (Step 3, page 6) to canopy (B) and
tighten securely.
4. Attach a blade (G) to a blade bracket
(F) using the blade screws (EE). Tighten
each blade screw (EE) securely. Repeat
for the remaining blades (G).
Hardware Used
EE Blade Screw
5. Insert two blade bracket screws with washers
(FF) through one blade bracket (F), then
attach blade bracket (F) to the motor housing
assembly (H). Tighten blade bracket screw
with washer (FF) securely. Repeat for the
remaining blades (F).
Hardware Used
Blade Screw
FF
with Washer
3
Outlet box
4
EE
x 13
5
FF
F
x 8
12
FINAL INSTALLATION
6. Remove the preassembled screws from
the switch housing cover on motor housing
assembly (H).
Screw
If using fan WITH the light kit, continue to
Step 7, If using fan WITHOUT the light kit,
proceed to Step 14.
7. If you want to use the light kit (J), connect
the male plug from the motor housing
assembly (H) to the female plug from the
G
switch housing (I).
WARNING: To avoid possible fire or
shock, power should be turned off prior
to the removal of the light kit.
F
8. Attach the switch housing (I) to the switch
housing cover on motor housing assembly
(H). Align holes in switch housing (I) with holes
H
on outer edge of the switch housing cover.
Install the previously removed screws (Step 6,
page 13) and tighten securely.
6
Screw
Switch housing
cover
7
Male plug
Female plug
I
J
8
Switch housing
cover
13
H
H
H
I