Cleaning Wall Surfaces; General Notes; English 5 - Kärcher T 50 Manual De Instrucciones

Cleaning wall surfaces

Fasten the T-Racer directly to the high-pressure
gun.
1 Press the bayonet connection of the T-Racer
into the connection of the high-pressure gun,
then turn by 90° until it locks into place.
2 Tighten the safety cover.
Caution
Always hold the high-pressure gun with both
the hands while cleaning the walls.
Troubleshooting
High-pressure cleaner does not build up the
pressure or is vibrating.
Dismantle the high-pressure nozzles, check
the high-pressure nozzles for damage, rinse
the T-Racer with clean water then reinstall
the high-pressure nozzles.
Cleaning the high-pressure nozzle
1 Remove the clip.
2 Pull out the high-pressure nozzle.
3 Rinse the high-pressure nozzle with clean
water, replace if necessary.
4 Insert the nozzle.
5 Re-insert the clip.

General notes

Maintenance and care
Care
Use a moist cloth and clean the appliance after
use.
Maintenance
The appliance is maintenance-free.
Environmental protection
The packaging material can be recycled.
Please do not place the packaging into the
ordinary refuse for disposal, but arrange for the
proper recycling.
Old appliances contain valuable materials
that can be recycled. Please arrange for
the proper recycling of old appliances.
Please dispose your old appliances using appro-
priate collection systems.
Warranty
The terms of the guarantee applicable in each
country have been published by our respective
national distributors. We will repair possible
faults on your unit free of charge within the war-
ranty period, insofar as the faults are caused by
material defects or defective workmanship.
Guarantee claims should be addressed to your
dealer or the nearest authorized customer serv-
ice centre, and supported by documentary evi-
dence of purchase.
Spare parts
Use only original spare parts. You will find a list
of spare parts at the end of these operating in-
structions.

English 5