Commissioning; Alignment; Sensing Range - SICK GTB6L Instrucciones De Uso

7

Commissioning

7.1

Alignment

7.2

Sensing range

8025391.1BHT / 2021-04-19 | SICK
Subject to change without notice
Align sensor on object. Select the position so that the red emitted light beam hits the
center of the object. You must ensure that the optical opening (front screen) of the
sensor is completely clear [see
Figure 2: Alignment
Adjust the mounting position to ensure the sensing range and the background are
within the specifications. See
NOTE
Observe the minimum distance of 5 mm.
Check the function as described in
behave as described in see table 2, page
Minimum distance in mm (y) between the set sensing range (x) and white background
(90% remission):
figure 2].
see figure 3, page 10.
see table 2, page 8. If the switching output fails to
8, check the application conditions.
7
COMMISSIONING
9