Commissioning; Alignment; Check The Application Conditions - SICK WL12G-3P3572S12 Manual De Instrucciones

7

COMMISSIONING

7 Commissioning
7.1

Alignment

en
7.2

Check the application conditions

18 O P E R A T I N G I N S T R U C T I O N S | WL12G-3P3572S12
PIN
2 = WH
3 = BU
4 = BK
5 = GY
Digital output:
PNP: Load → M
Align the sensor with a suitable reflector. Select the position so that the red emitted
light beam hits the center of the reflector. The sensor must have a clear view of the
reflector. There must be no object in the path of the beam [see
ensure that the optical openings of the sensor and reflector are completely clear.
Move transparent film and thread into beam path, distance 60 mm [see
Figure 6: Alignment 1
Figure 7: Alignment 2
Check the distance between sensor and reflector. There is a max. sensing range of
500 mm with reflector P250F.
Pin assignment
Q
- (M)
Q
Teach
figure 6]. You must
8027339/1D6C/2021-11-19 | SICK
Subject to change without notice
figure 7].