Terminals; Warning Out Terminal; Tape End Out/Series Out Terminal - Sony SVT-RA168 Manual De Instrucciones

Terminals

WARNING OUT Terminal

This terminal will help you to know when something
wrong has happened to the VCR during recording.
The VCR outputs a pulse signal from WARNING
OUT terminal.
COM terminal
Tape recording stops.
WARNING OUT terminal
5 V
0 V
To reset the output signal,
press STOP x or
EJECT Z, or press the reset
button.
TAPE END OUT/SERIES OUT
Terminal
TAPE END OUT Terminal
When the VCR detects the tape end or the time counter
shows "6H" or "8H" (depending on the TAPE setting
of the GENERAL SET menu) during recording, the
output level becomes 0 V DC. To resume the 5 V
output, press the operation button (EJECT Z, REC z,
FF M, REW m, PLAY B or STOP x etc.).
COM terminal
REC mode
Tape end Beginning of tape
Recording Rewind
mode
Output
signal
REPEAT REC mode
Tape end
Recording
Rewind
mode
Output
signal
2 sec.
TAPE END/SERIES OUT terminal
Press operation
button.
Stop
5 V
0 V
Beginning of tape
Recording
5 V
0 V
45