Dräger REGARD 3000 Instrucciones De Uso página 151

8.5.4.2 Device parameter menu
Information on the transmitter can be recorded in this menu.
Parameter
Device name
Device part num-
ber
Device serial num-
ber
Sensor name
Sensor part num-
ber
Sensor serial num-
ber
Startup inhibit time Time for which the channel is locked after switching on the
|
Instructions for use
REGARD 3000
Description
Input device name of the transmitter connected to the chan-
nel. Selection via dropdown list or text input.
The selection of a device name does not lead to a change in
the channel configuration for the relevant transmitter. The
device wizard must be used for this purpose.
Device wizard
A Dräger transmitter can be selected with the device wizard.
The parameters are automatically assigned with the default
values of the transmitter depending on the transmitter. The
default values can be changed after exiting the device wiz-
ard.
The user needs to check the accuracy of the configuration
and the accordance with the configuration of the connected
transmitter even when using the device wizard.
Order number of the transmitter.
Serial number of the transmitter.
Sensor name of the sensor used in the transmitter.
Order number of the sensor.
Serial number of the sensor.
transmitter power supply voltage. This ensures that no
alarms are triggered during the warm-up phase of the trans-
mitter.
Adjustable range: 0 to 600 s
|
en
User roles
151