Software Modes Of Operation; Offline Configuration Mode; Online Configuration Mode; Creating A New System Configuration - Dräger REGARD 3000 Instrucciones De Uso

11.3

Software modes of operation

The configuration software can be used with an Ethernet connection to the system
during operation (online) or without a connection to the system (offline).
11.3.1

Offline configuration mode

The following application cases can be changed in this mode:
– Creating new system configurations
– Editing/changing system configurations
– Opening and saving system configuration files
– Creating a report of the offline configuration (only REGARD 7000)
11.3.2

Online configuration mode

The following application cases can be changed in this mode:
– Editing/changing system configurations
– Opening and saving system configuration files
– Downloading the system configuration
11.4

Creating a new system configuration

11.4.1

Useful key combinations

Keys
PLUS or INS
MINUS or DEL
CTRL + UP
CTRL + DOWN
UP
DOWN
LEFT
RIGHT
ENTER KEY
ESC
11.4.2

Creating a new system

1. Select File > New system.
✓ An empty new system is created in the system view. If a system has previously
been created but not saved, the Discard changes? dialogue is displayed.
11.4.3

Adding or removing a Docking Station

11.4.3.1 Adding a Docking Station
1. In the System view area, select
|
Instructions for use
REGARD 3000
REGARD configuration software
Action
Add module or Docking Station to the
selected element.
Remove selected module(s) or Docking
Station(s).
Move the selected Docking Station up.
Move the selected Docking Station
down.
Move up in the structure tree.
Move down in the structure tree.
Close the structure tree.
Open the structure tree.
Confirm current dialogue.
Reject current dialogue.
.
|
en
175