LG PC09SQNSJ Manual Del Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
• Any person who is involved with working on or breaking into a refriger-
ant circuit should hold a current valid certificate from an industry-accred-
ited assessment authority, which authorises their competence to handle
refrigerants safely in accordance with an industry recognised assess-
ment specification.
• Wear adequate personal protection equipment (PPE) when installing,
maintaining or servicing the product.
Operation
• Do not use the product for special purposes, such as preserving foods,
works of art, etc. It is a consumer air conditioner, not a precision refriger-
ation system. There is risk of damage or loss of property.
• Do not block the inlet or outlet of air flow. It may cause product failure.
• Use a soft cloth to clean. Do not use harsh detergents, solvents or
splashing water etc. There is risk of fire, electric shock, or damage to the
plastic parts of the product.
• Do not touch the metal parts of the product when removing the air filter.
There is risk of personal injury.
• Do not step on or put anyting on the product. There is risk of personal injury
and failure of product.
• Always insert the filter securely after cleaning. Clean the filter every two
weeks or more often if necessary. A dirty filter reduces the efficiency.
• Do not insert hands or other objects through the air inlet or outlet while
the product is operating. There are sharp and moving parts that could
cause personal injury.
• Be cautious when unpacking and installing the product. Sharp edges
could cause injury.
• If the refrigerant gas leaks during the repair, do not touch the leakaing re-
frigerant gas. The refrigernat gas can cause frostbite (cold burn).
• Do not tilt the unit when removing or uninstalling it. The condensed
water inside can spill.
• Do not mix air or gas other than the specified refrigerant used in the sys-
tem. If air enters the refrigerant system, an excessively high pressure re-
sults, causing equipment damage or injury.
• If the refrigerant gas leaks during the installation, ventilate the area im-
mediately. Otherwise it can be harmfull for your health.
• Dismantling the unit, treatment of the refrigerant oil and eventual parts
should be done in accordance with local and national standards.
• Replace the all batteries in the remote control with new ones of the
same type. Do not mix old and new batteries or different types of batter-
ies. There is risk of fire or product failure.
(for R32)
IMPORTANT SAFETY INSTRUCTIONS
7

Publicidad

Tabla de contenido
loading

Tabla de contenido