Sauder Edge Water 419401 Manual Del Usuario página 20

Step 15
Carefully turn your Hutch assembly onto its back.
å
Fasten the LEFT END (B) and MODESTY PANEL (G)
å
to the TOP (E). Tighten two HIDDEN CAMS and two
TWIST-LOCK® FASTENERS.
Maximum
210 degrees
Minimum
190 degrees
M
B
Page 20
Arrow
G
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
E
419401
®
FASTENER
Dowel end
www.sauder.com/services