Sauder Edge Water 419401 Manual Del Usuario página 24

Step 19
Fasten the RIGHT END (A) to the TOP (E), BOTTOM (F),
å
and SHELF (H). Tighten six HIDDEN CAMS.
Fasten two ANGLE BRACKETS (5G) to the BOTTOM (F).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the edges of the ANGLE BRACKETS are
å
even with the edges of the BOTTOM.
Fasten the FRONT MOLDING (W) to the BOTTOM (F).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (1S)
through the ANGLE BRACKETS on the BOTTOM and into
the FRONT MOLDING.
Page 24
Angled edge
E
W
F
5G
419401
Maximum
210 degrees
Minimum
190 degrees
H
M
A
u t
i t h o
e w
M S
f a c
C A
S u r
D E N
H I D
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
Arrow
1S
www.sauder.com/services