I-Tech MAG1000 Manual De Instrucciones página 24

Guidance and manufacturer's declaration – ELECTROMAGNETIC IMMUNITY –
MAG1000 is intended for use in the electromagnetic environment specified below.
The user or operator of MAG1000 should assure that is used in such environment.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Impulses
IEC 61000-4-5
Voltage dips, short
interruptions and
voltage variations on
power supply input
lines
IEC 61000-4-11
IACER Srl
FOR ALL DEVICES AND SYSTEMS
Test level
IEC 60601
±6kV at contact ±6kV at contact
±8kV in air ±8kV in air
±2kV ±2kV
for power for power
supply lines supply lines
±1kV ±1kV
differential differential
mode mode
<5% U <5% U
T
(>95% dips of (>95% dips of
U ) U
T T
for 0,5 cycle for 0,5 cycle
40% U 40% U
T
(60% dips of U ) (60% dips of U
T
for 5 cycle for 5 cycle
70% U 70% U
T
(30% dips of U ) (30% dips of U
T
for 25 cycle for 25 cycle
<5% U <5% U
T
(>95% dips of (>95% dips of
U ) U
T T
for 5s for 5s
24
Electromagnetic
Compliance
environment –
level
Floors
wood,
ceramic tile. If floor is
covered with synthetic
material, the relative
humidity should be at
least 30%.
Mains power quality
should be at least that
one
commercial
hospital environment.
Mains power quality
should be at least that
one
commercial
hospital environment.
Mains power quality
T
should be at least that
)
one
commercial or hospital
environment.
If the user of the
T
)
T
MAG1000
continued operating
during power mains
T
interruptions,
)
T
recommended
MAG1000 be powered
from
T
uninterruptible power
supply (UPS) or a
)
battery
guidance
should be
concrete or
of a typical
or
of a typical
or
of a typical
requires
it is
that
an
MNPG250-03