I-Tech MAG1000 Manual De Instrucciones página 27

Recommended separation distances between portable and mobile RF
communications equipment for MAG1000 that are not life-supporting
MAG1000 is intended for the use in an electromagnetic environment in which
radiated RF disturbances are controlled. The user or the operator of MAG1000 can
help prevent electromagnetic interferences by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and
MAG1000 as recommended below, according to the maximum output power of
the communication equipment.
Rated maximum
power of the
transmitter (W)
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter
in Watts (W) according to the transmitter manufacturer.
Nota
(1)
At 80 MHz and 800 MHz the separation distance for the higher frequency range
applies.
(2)
These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
MAG1000. Todos los derechos son reservados MAG1000 y el logo
son de exclusiva propiedad de I.A.C.E.R. Srl y son registrados.
Edición: MNPG250-02 del 22/06/2020
IACER Srl
Separation distance according to the frequency of
from 150kHz
80MHz to 800MHz
to 80 MHz
d = 1,2√P
0,12
0,38
1,2
3,8
12
transmitter (m)
d = 1,2√P
0,12
0,38
1,2
3,8
12
27
800MHz to
2,5GHz
d = 2,3√P
0,23
0,73
2,3
7,3
23
MNPG250-03