Sauder Camden County 101702 Manual Del Usuario página 29

9
The bottom edge of the
BACK should be even
with the bottom surface
of the BOTTOM.
NAIL (OO)
(19 used in this step)
- Carefully turn your unit over onto its front edges. Unfold the BACK (E) and lay it over your unit.
NOTE: Be sure the notched edge of the BACK is positioned as shown. Be sure the bottom edge of the
BACK is even with the bottom surface of the BOTTOM (D). Follow the diagram.
NAILING ON THE BACK:
1st: Tap a NAIL (OO) into the row of holes along the top edge of the BACK (E).
2nd: Be sure there is an equal amount of margin along both side edges of the BACK. This will assure your
unit is "square."
3rd: Then, tap a NAIL into the row of holes along the bottom edge of the BACK.
- Continue fastening the BACK (E) to your unit using the NAILS (OO).
STOP
STOP
Do NOT stand the unit
upright without the
BACK fastened. The
unit may collapse.
BACK (E)
BOTTOM (D)
www.sauder.com/services
Notched
edge
101702