Sauder Camden County 101702 Manual Del Usuario página 5

1
TWIST-LOCK
FASTENER (Y)
Look for this icon. It means a video assembly tip is available at:
Repérer cette icône. Elle signifie qu'un conseil de montage vidéo est disponible à :
Busque este icono. Significa que un consejo práctico para ensamble de muebles, grabado en video, está disponible en:
www.sauder.com/services/tips
Read each step through completely before beginning the step. This box "-" is provided as a check- -off box. As you
complete each task, check it off.
- To begin assembly, push a SAUDER TWIST-LOCK
and LEFT END (B3). Repeat this step for the BOTTOM (D).
NOTE: Be sure the TWIST-LOCK
Make sure the point is positioned as shown in the enlarged diagram. Do not tighten the
TWIST-LOCK
NOTE: If you need to remove a TWIST-LOCK
of the hole. Pull at the front and back edges, slowly working the FASTENER out of the hole.
R
LEFT
END (B3)
R FASTENERS are positioned as shown in the enlarged diagrams.
R FASTENERS at this time.
www.sauder.com/services
Dowel end
RIGHT
END (A3)
R FASTENER (Y) into the large holes in the RIGHT END (A3)
R
FASTENER from a hole, pull the FASTENER back out
Make sure this point
is in this location.
101702